
Deck Cost Guide
2026 national price ranges for decks, Trex, repairs, staining and pergolas, with the sources behind every number. Planning a deck in the Salt Lake Valley? Use these to set a budget, then get a written estimate for your project.
Get a Free Quote
Deck Costs at a Glance
These are published national ranges, not our prices. Every figure links to its source below. Utah labor and material costs can land above or below national averages, so treat these as a starting point for your budget.
| Project | Typical national cost | Source |
|---|---|---|
| New deck, professionally built | $4,339 – $12,652 (average $8,321); about $30 – $60 per sq ft | [1] |
| Composite deck, installed | $25 – $54 per sq ft | [1] |
| Trex deck, 100 sq ft | $1,850 – $9,600 (average $6,000); complete Trex deck $20 – $62 per sq ft | [2] |
| Deck repair | $890 – $3,665 (average $2,249) | [3] |
| Deck replacement | around $8,000 for a full replacement | [3] |
| Deck staining | $550 – $1,250 | [1] |
| Deck sealing | $550 – $1,330 | [1] |
| Deck cleaning | $30 – $60 per hour | [1] |
| Pergola, 100 sq ft, installed | $2,118 – $6,433 (average $4,253) | [4] |
| Deck permit fees | $230 – $500 in most areas | [1] |
Last updated October 26, 2026.
Cost to build a deck
Size is the biggest driver: national guides put a professionally built deck at roughly $30 to $60 per square foot, with labor alone around $15 to $35 per square foot. [1]
What drives the price
- Decking material (pressure-treated, cedar, composite or PVC)
- Height: second-story decks need bigger posts, beams and footings
- Slope and access to the backyard
- Stairs, railings, lighting and built-ins
- Permits and inspections
Composite and Trex deck cost
Composite boards cost more than wood up front. For Trex, Angi lists material prices by series: Enhance about $5 to $7 per square foot, Select $7 to $9, Transcend $10 to $12 and Signature $14 to $16, with installation adding roughly $8 to $22 per square foot. [2]
What drives the price
- Board line and color
- Hidden fasteners and picture-frame borders
- Composite or aluminum railings
- Whether the existing frame can be reused
- Joist spacing required by the manufacturer
Deck repair and replacement cost
Repairs depend on how far the damage goes. Replacing a few boards or re-securing a railing is a small job; rot in joists, beams or the ledger can turn a repair into a rebuild, which national data puts around $8,000. [3]
What drives the price
- Size of the damaged area
- Whether framing, posts or the ledger are affected
- Tear-out and haul-away of the old deck
- Matching existing boards and railings
- Permit fees for structural work
Deck staining, sealing and cleaning cost
Prep is most of the work. National ranges run about $550 to $1,250 for staining and $550 to $1,330 for sealing, with cleaning billed around $30 to $60 an hour. [1]
What drives the price
- Deck size plus railings, stairs and skirting
- Stripping or sanding a failing finish
- Semi-transparent vs solid stain
- Condition of the wood
Pergola cost
For a typical 100-square-foot pergola, national data shows most homeowners pay $2,118 to $6,433. Material is the main swing: aluminum and vinyl run about $10 to $30 per square foot, cedar $25 to $35 and redwood $40 to $50. [4]
What drives the price
- Material: aluminum, vinyl, cedar or redwood
- Freestanding vs attached to the house or deck
- Louvered or motorized roofs
- Footings and site prep
Ways to Lower the Cost of a Deck
- Keep the shape simple: a rectangle costs less than wraparound or multi-level designs.
- Resurface instead of rebuilding when the frame and footings are still sound.
- Choose the board line for how you use the deck, not the top of the range by default.
- Bundle cleaning and staining, or add a pergola while the crew is already on site.
- Get the permit and HOA requirements settled early so plans are not redrawn.
Deck Cost Questions
Frequently Asked Questions
How much does it cost to build a deck per square foot?
National cost guides put a professionally built deck at roughly $30 to $60 per square foot, with labor making up about $15 to $35 of that. Material, height, stairs and site access move the number, so your price depends on the specific deck.
How much does a Trex deck cost?
Angi reports a 100-square-foot Trex deck averages about $6,000 nationally, with most projects between $1,850 and $9,600. A complete Trex deck with framing, railings and stairs runs about $20 to $62 per square foot depending on the series.
Is it cheaper to repair or replace a deck?
Repair is usually cheaper when the damage is limited to boards, railings or a few joists; national data puts most repairs at $890 to $3,665. If the framing, posts or ledger are rotted, replacement is often the better long-term value.
Does composite decking cost more than wood?
Yes, up front. Installed composite runs about $25 to $54 per square foot nationally, more than pressure-treated wood. Composite skips the regular staining and sealing that wood needs, so the gap narrows over the life of the deck.
Are these your prices?
No. These are published national ranges from the sources listed below, shown to help you plan. SLC Deck Builders gives a written estimate for your deck after we see the site, and prices in Utah can be higher or lower than national averages.
Sources
- Angi, "How Much Does It Cost to Build a Deck?" (updated Sep 24, 2026)
- Angi, "How Much Does Trex Decking Cost?" (updated Oct 13, 2026)
- Angi, "How Much Does Deck Replacement or Repair Cost?" (updated Oct 20, 2026)
- Angi, "How Much Does It Cost to Build a Pergola?" (updated Sep 23, 2026)
National figures as published by each source on the date shown. SLC Deck Builders is a local deck contractor; ranges are for planning only and are not a quote.
Talk to a Salt Lake City Deck Builder Today
Tell us what you want to build, repair or replace. We will visit for a free, no-obligation estimate and give you a clear plan for your outdoor space.
(801) 435-8845Or fill out the form and we'll be in touch shortly.